2013 R1 - Tagging Info Icon
Support tags can be added automatically to any contour tool path (including 5-axis) This overcomes the issue of small parts moving during the nesting process, reducing material wastage and improving part quality.
 

2013 R1 - Tagging

2013 R1 - Tagging

Support tags can be added automatically to any contour tool path (including 5-axis) This overcomes the issue of small parts moving during the nesting process, reducing material wastage and improving part quality.

 
2013 R1 - Tool Path Oscillation

2013 R1 - Tool Path Oscillation

A sinusoidal or zig-zag up and down movement can be applied to any contour tool path, utilizing more of the effective cutting length of the tool used. This improves the surface finish and extends the tool life.

 
2013 R1 - Spot Drill and Chamfering

2013 R1 - Spot Drill and Chamfering

This new cycle supports any drill type and calculates the required machining depth from a given chamfer depth. All selected holes will be analyzed to ensure the tool can enter the hole where there is a flat on the bottom of the tool, and that the tool diameter is sufficient to complete the full depth of chamfer.

 
2013 R2   Program Stop Operation

2013 R2 Program Stop Operation

A program stop can be easily added as an operation and output in the NC code, allowing for a part to be turned midway through a program for example. The stop can be re-sequenced in the operation list and added to a Machining Style.

 
2013 R2   BTL Translator

2013 R2 BTL Translator

Improved importing of BTL format assemblies, now supporting; Lap Joint, Ridge or Valley Cut, Birds Mouth and Free Contour.

 

There are no scheduled upcoming events.

 

© Copyright 2017 Vero Software | Part of Hexagon
de it za mx